30 Jul Can your fire system do this?
Despite many fire engineers being highly trained, skilled and experienced, without the right tools at their disposal the process of undertaking routine tasks can be challenging and time-consuming writes Advanced’s general manager for the Middle East, Asia and the Pacific, Steve Carroll, who goes onto explore the diagnostic features of fire panels which will save time, money and hassle.
Fire detection and alarm systems are increasingly complex and sophisticated, benefiting from cutting-edge digital technology. As a fire alarm engineer installing, servicing and/or commissioning such technology, it can be hard to keep on top of your electrical skills and the latest regulations/local installation standards, let alone the many different panels’ features.
Any given day could see the typical fire engineer conducting a wide range of differing tasks – from diagnosing and remedying open/short circuits, earth or intermittent faults, to commissioning a new networked system in line with standards, relevant local Civil Defence approvals and project specification.
Despite many fire engineers being highly trained, skilled and experienced, without the right tools at their disposal the process of undertaking these routine tasks can be challenging and time-consuming.
Thankfully, the features of today’s fire panels offer tangible benefits to engineers and end users alike, by delivering versatility, ease of use and time-saving capabilities that were previously unavailable.
Standard logging v trace logging
Upon arriving at a site with a suspected system fault, one of the first things to do to troubleshoot the problem is refer to the fire panel’s log. In this state, a high-quality system can quickly flag any system faults – within seconds in some cases.
Although useful, standard logging gives only one part of the picture and provides minimal help in cases where the cause of the problem is not straightforward.
Trace-logging mode is a feature of some modern fire panels that lets users see a more complete log of a fire system’s events covering the standard fire, faults, alarms and pre alarms as well as more advanced diagnostic reports on corrupt data and device interrupts. This more detailed view of all the faults on a system can radically reduce the time it takes to establish the true cause of the problem, allowing you to implement a quick, effective remedy.
Another important factor to consider is how easy the panel’s menus are to navigate – and some interfaces prove easier to use than others. Our trace-logging mode has been developed with the engineer in mind. The need to navigate and decipher options from complicated menu structures has been removed. In addition, the data is delivered in easy-to-understand format to help minimise the risk of misinterpreting information and enabling you to diagnose problems with greater accuracy.
The process of fault-finding can be significantly more difficult when working with a fire alarm control panel that doesn’t feature a diagnostic logging mode. These panels may register a number of intermittent faults coming and going, but not necessarily offer any further traceability to these events. Commonly where a fire panel has a limited ability to trace a fault, issues within a system can go un-remedied for long periods of time, placing the safety of occupants within a building or a site at risk.
Some fire systems give you the ability to transfer the panel’s event log to a PC where you can then use software to drill down into specific events and information. Integrated software allows you to easily identify particular devices that are returning corrupt messages, and even lets you predict when faults are likely to occur. Once a problematic device or area has been identified, you are then able to investigate.
An oscilloscope is a vital tool when commonly dealing with the installation, commissioning and maintenance of fire systems. A scope reading can help diagnose faults by identifying the areas of a site where problems are coming from.
In cases where you are working across large sites – such as university campuses, tall buildings or hospital settings – identifying disturbances on a loop can prove labour-intensive and time-consuming. Carrying additional equipment through multiple departments, floors or wings of a development in order to set up at a different panel each time, makes the job of pinpointing faults more taxing.
An oscilloscope built into the fire alarm control panel, will not only relieve you of having to carry around additional equipment, but also provides a graphical representation of the signalling voltages/currents and waveforms on the display. In this way, you get a detailed view of the loop operational conditions which can’t be seen using multi-meters or volt meters.
As the only intelligent addressable fire alarm control panel in the world to offer an onboard oscilloscope, Advanced’s Axis EN control panel provides readings from any loop at the panel, making it easy to identify forms of noise that may be causing faults. The oscilloscope feature also lets you easily use trigger-addresses from the loop to identify issues and investigate. This is a particularly useful feature on large sites with multiple panel networks, such as high-rise buildings, shopping malls, hotels or college campuses.
A high-performance fire panel will provide you with powerful tools that enable you to quickly and efficiently access information in order to make key decisions. A multi-meter is an instrument designed to take precise measurements of electric current, voltage and usually resistance across the system.
On a well-designed system, all devices have the optimum voltage in order to be able to communicate back to the panel. However, if that voltage drops below a certain level, devices can drop off the system or report intermittent faults.
Uniquely, our Axis EN fire alarm control panels come with an in-built multi-meter designed to measure all voltages and currents across the fire alarm system. For engineers, a multi-meter within the fire panel makes it easy to identify voltage/current levels in real time without needing to set up a portable multi-meter or probing circuits, which speeds up the commissioning process.
In large-scale sites, a network of fire panels is the most effective means of protecting life and property. Where a networked system is installed, the most common installation problems are open/short circuit conditions, reversals in wiring or poor termination.
An effective network diagnostics tool within control panels can allow viewing of all CIE node status and access levels in real time. In levels 1 and 2 the CIE would operate in normal condition, whereas in level 3 the CIE will be in commissioning. In this level the control panel can be isolated while work takes place, preventing fires and faults from being transmitted across the network.
In addition, we have developed the network diagnostic tool to identify reverse ring faults in systems that consist of one or more fibre optic links, something that is increasingly common across installations.
What next for diagnostics?
Understanding the tools and built-in features of the fire panel that effectively help fire engineers to install, commission, diagnose faults and repair a system can save significant time and money. This knowledge in turn helps to ensure the long-term safety of occupants within a building.
As technology evolves, and the fire panel continues to develop, we predict a continuing trend towards more digital-driven products and remote services. These will provide commissioning engineers and system integrators with a more global view of the systems they are responsible for servicing and maintaining.
As the fire industry moves increasingly towards cloud communications and data analytics, the automatic generation of service reports, the remote control of panels and the ability to put zones in and out of test from a web / mobile app will likely become commonplace. These developments will see systems becoming smarter than we’ve ever seen before.